#!/usr/bin/bash
# BEGIN_ICS_COPYRIGHT8 ****************************************
#
# Copyright (c) 2015-2024, Intel Corporation
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
#
#     * Redistributions of source code must retain the above copyright notice,
#       this list of conditions and the following disclaimer.
#     * Redistributions in binary form must reproduce the above copyright
#       notice, this list of conditions and the following disclaimer in the
#       documentation and/or other materials provided with the distribution.
#     * Neither the name of Intel Corporation nor the names of its contributors
#       may be used to endorse or promote products derived from this software
#       without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
# CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
# OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# END_ICS_COPYRIGHT8   ****************************************

# [ICS VERSION STRING: @(#) ./bin/ethcapture 11_7_0_0_111 [10/31/24 00:00]

readonly BASENAME="$(basename $0)"

# Usage: ethcapture output_file_name
# captures system information for product problem reporting
MAX_FILE_SIZE=${MAX_FILE_SIZE:-10485760} # 10 MB
Usage_full()
{
	echo "Usage: $BASENAME [-d detail] output_tgz_file" >&2
	echo "              or" >&2
	echo "       $BASENAME --help" >&2
	echo "   --help - Produces full help text." >&2
	echo "   -d detail - Captures level of detail:" >&2
	echo "       1 (Local) - Obtains local information from host. This is the default if" >&2
	echo "             no options are entered." >&2
	echo "       2 (Fabric) - In addition to Local, also obtains basic fabric information" >&2
	echo "             using ethreport." >&2
	echo "       3 (Analysis) - In addition to Fabric, also obtains ethallanalysis" >&2
	echo "             results. If ethallanalysis has not yet been run, it is run as part" >&2
	echo "             of the capture." >&2
	echo "       NOTE: For detail levels 2 – 3, the additional information is only" >&2
	echo "             available on a node with FastFabric Toolset installed." >&2
	echo "   output_tgz_file - Specifies the name of a file to be created by ethcapture." >&2
	echo "       The file name specified is overwritten if it already exists. If the" >&2
	echo "       filename given does not end with the '.tgz' suffix, the '.tgz' suffix" >&2
	echo "       is added." >&2
	echo "The resulting tar file should be sent to Customer Support along with any problem" >&2
	echo "report regarding this system." >&2
}

_copy() {
	local src="$1"
	local dst="$2"
	if [ ! -e "$src" ]; then
		echo "Error - $src does not exist"
		return 1
	fi

	# handle special case when we copy a single file
	if [ -f "${src}" ]; then
		if [ -d "${dst}" ]; then
			cp --preserve=mode,ownership,timestamps "${src}" "${dst}"
		else
			local dir="$(dirname "$dst")"
			mkdir -p "${dir}"
			cp --preserve=mode,ownership,timestamps "${src}" "${dst}"
		fi
		return 0
	fi

	# copy empty dirs as the structure itself is important
	# printf "%P\n" returns the path relative to "$src"
	find "${src}" -depth -type d -empty -printf "%P\n" \
	| while read -r dir
	do
		mkdir -p "${dst}/${dir}"
	done

	# copy all files less than MAX_FILE_SIZE bytes
	find "${src}" -type f -size -${MAX_FILE_SIZE}c -printf "%P\n" \
	| while read file
	do
		local dir="$(dirname "$file")"
		mkdir -p "${dst}/${dir}"
		cp --preserve=mode,ownership,timestamps "${src}/${file}" "${dst}/${dir}"
	done

	# log all files skipped because of size
	find "${src}" -type f -not -size -${MAX_FILE_SIZE}c -printf "%P\n" \
	| while read file
	do
		local size=$(stat -c "%s" "${src}/${file}")
		local dir="$(dirname "$file")"
		mkdir -p "${dst}/${dir}"
		echo "Large content (${size} bytes) skipped" > "${dst}/${file}"
	done

	# copy symlinks as the structure itself is important
	find "${src}" -type l -printf "%P\n" \
	| while read link
	do
		local dir="$(dirname "$link")"
		mkdir -p "${dst}/${dir}"
		cp --no-dereference "${src}/${link}" "${dst}/${link}"
	done
}

Usage()
{
	Usage_full
	exit 2
}

if [ x"$1" = "x--help" ]
then
	Usage_full
	exit 0
fi


if [ -f /usr/lib/eth-tools/ff_funcs ]
then
	. /usr/lib/eth-tools/ff_funcs
	ff_available=y
else
	ff_available=n
fi

if [ $ff_available = "y" ]
then
	if [ -f $CONFIG_DIR/$FF_PRD_NAME/ethfastfabric.conf  ]
	then
		. $CONFIG_DIR/$FF_PRD_NAME/ethfastfabric.conf
	fi

	. /usr/lib/$FF_PRD_NAME/ethfastfabric.conf.def
fi

detail=1

while getopts d: param
do
	case $param in
	d)
		detail="$OPTARG";;
	?)
		Usage;;
	esac
done
shift $((OPTIND -1))

if [ $# != 1 ]
then
	Usage
fi

if [ `id -u` -ne 0 ]
then
	echo "This must be run as user root" >&2
	Usage
fi

if [ x`expr "$1" : '\(/\).*'` != x'/' ]
then
	# relative path
	tar_file=`pwd`/$1
else
	# absolute path
	tar_file=$1
fi

# append .tgz suffix if not already present
if [ x$(expr "$tar_file" : '.*\(\.tgz\)') != x'.tgz' ]
then
	tar_file="$tar_file.tgz"
fi

dir=tmp/capture$$
rm -rf /$dir
mkdir /$dir

echo "Capture Info: Detail: $detail; Date: $(date)" >> /$dir/capture_info

echo "Getting software and firmware version information ..."
echo "[ICS VERSION STRING: @(#) ./bin/ethcapture 11_7_0_0_111 [10/31/24 00:00]" > /$dir/sw_version
uname -a > /$dir/os_version
# we use query format so we can get ARCH information
rpm --queryformat '[%{NAME}-%{VERSION}-%{RELEASE}.%{ARCH}\n]' -qa > /$dir/rpms.detailed
# get simple version just to be safe
rpm -qa > /$dir/rpms

echo "Capturing Ethernet NIC devices"
# Finding the PCI devices
for fw in `lspci | grep -E -i "network|ethernet"`
do
	# Just get the PCI info for now...
	echo "$fw" >> /$dir/fw_info
done

if type ethtool > /dev/null 2>&1
then
	for dev in $(ls /sys/class/net)
	do
		echo "============== $dev ==============" >> /$dir/fw_details
		ethtool $dev >> /$dir/fw_details 2>&1
		echo "" >> /$dir/fw_details
		echo "------ Driver Info ------" >> /$dir/fw_details
		ethtool -i $dev >> /$dir/fw_details 2>&1
		echo "" >> /$dir/fw_details
		echo "------ Register Dump ------" >> /$dir/fw_details
		ethtool -d $dev >> /$dir/fw_details 2>&1
		echo "" >> /$dir/fw_details
		echo "------ EEPROM Dump ------" >> /$dir/fw_details
		echo ".... Encoded EEPROM Info ...." >> /$dir/fw_details
		ethtool -m $dev >> /$dir/fw_details 2>&1
		echo "" >> /$dir/fw_details
		echo ".... Raw EEPROM Info ...." >> /$dir/fw_details
		ethtool -e $dev >> /$dir/fw_details 2>&1
		echo "" >> /$dir/fw_details
	done
else
	echo "Warning: Skipped NIC dev info collection because ethtool not found"
fi

echo "Capturing RDMA Device Information"
if type ibv_devices > /dev/null 2>&1
then
	ibv_devices > /$dir/ibv_devices 2>&1
	ibv_devinfo -v > /$dir/ibv_devinfo 2>&1
else
	echo "Warning: Skipped RDMA dev info collection because ibv_devices not found"
fi

echo "Obtaining OS configuration ..."
# get library config
ldconfig -p > /$dir/ldconfig
# get current runlevel
who -r > /$dir/who_r 2>/dev/null	# not available on all OSs
runlevel > /$dir/runlevel	# not available on all OSs
# get service startup configuration
if [ $(command -v systemctl) ]; then
	systemctl list-unit-files > /$dir/chkconfig.systemd
fi
chkconfig --list > /$dir/chkconfig 2>/dev/null
ulimit -a > /$dir/ulimit
uptime > /$dir/uptime

echo "Obtaining dmesg logs ..."
dmesg -T > /$dir/dmesg

echo "Obtaining journald logs ..."
if type journalctl > /dev/null 2>&1
then
	journalctl --since="-7 days" > /$dir/journalctl.log
else
	echo "journalctl is not available on the system" > /$dir/journalctl.log
fi

echo "Obtaining present process and module list ..."
lsmod > /$dir/lsmod 2>&1
depmod -a 2>&1
_copy /lib/modules/`uname -r`/modules.dep /$dir/modules.dep
ps -welf > /$dir/ps 2>&1

echo "Obtaining module info for ice ..."
modinfo ice > /$dir/modinfo_ice 2>&1

echo "Obtaining module info for irdma ..."
modinfo irdma > /$dir/modinfo_irdma 2>&1

echo "Obtaining module info for rv ..."
modinfo rv > /$dir/modinfo_rv 2>&1

echo "Obtaining PCI device list ..."
lspci -vvv -xxxx > /$dir/lspci 2>&1
ls -l /dev/infiniband > /$dir/lsdev

echo "Obtaining processor information ..."
cpucount=$(grep -c processor /proc/cpuinfo)
cpupower -c 0-$((cpucount - 1)) frequency-info > /$dir/cpu-frequency-info 2>&1
grep . /sys/devices/system/cpu/cpu*/cpufreq/scaling* > /$dir/cpu-scaling-info 2>&1
grep . /sys/devices/system/cpu/intel_pstate/* > /$dir/cpu-intel_pstate 2>&1
unset cpucount

lscpu > /$dir/lscpu 2>&1
lscpu --extended=CPU,CORE,SOCKET,NODE,BOOK,DRAWER,CACHE,POLARIZATION,ADDRESS,CONFIGURED > /$dir/lscpu-extended 2>&1

echo "Obtaining environment variables ..."
env > /$dir/env 2>&1

echo "Obtaining network interfaces ..."
ip addr show > /$dir/ifconfig 2>&1

echo "Obtaining DMI information ..."
dmidecode > /$dir/dmidecode 2>&1

echo "Obtaining Shared Memory information ..."
sysctl -a > /$dir/sysctl 2>&1
sysctl -a 2>/dev/null | grep kernel.shm > /$dir/shm 2>&1
ls -d /dev/shm >> /$dir/shm 2>&1
ls -lR /dev/shm >> /$dir/shm 2>&1

echo "Obtaining device statistics"
if type ethtool > /dev/null 2>&1
then
	for dev in $(ls /sys/class/net)
	do
		echo "============== $dev ==============" >> /$dir/fw_stats
		echo "------ Adapter Statistics ------" >> /$dir/fw_stats
		ethtool -S $dev >> /$dir/fw_stats 2>&1
		echo "" >> /$dir/fw_stats
		echo "------ Phys Statistics ------" >> /$dir/fw_stats
		ethtool --phy-statistics $dev >> /$dir/fw_stats 2>&1
		echo "" >> /$dir/fw_stats
	done
else
	echo "Warning: Skipped because ethtool not found."
fi

echo "Obtaining MPI configuration ..."
if type mpi-selector >/dev/null 2>&1
then
	mpi-selector --list > /$dir/mpi-selector-list
	mpi-selector --system --query > /$dir/mpi-selector-system
	mpi-selector --user --query > /$dir/mpi-selector-user
else
	echo "Warning: Skipped because mpi-selector not found."
fi

mkdir /$dir/proc
echo "Copying configuration and statistics from /proc ..."
for proc_file in cmdline cpuinfo ksyms meminfo mtrr modules net/arp net/dev net/dev_mcast net/route net/rt_cache net/vlan pci interrupts devices filesystems iomem ioports slabinfo version uptime scsi irq acpi/processor
do
	if [ -e /proc/$proc_file ]
	then
		_copy /proc/$proc_file /$dir/proc
	fi
done
for proc_file in `ps -eo pid`
do
	if [ -e /proc/$proc_file/stack ]
	then
		mkdir -p /$dir/proc/$proc_file
		_copy /proc/$proc_file/stack /$dir/proc/$proc_file
	fi
done

echo "Obtaining additional CPU info..."
if type cpupower >/dev/null 2>&1
then
	cpupower frequency-info > /$dir/cpupower-freq-info
else
	echo "Warning: Skipped because cpupower not found."
fi

# Check if ice driver debug data dir) is present; log only if present
ICE_DEBUGDIR="/sys/kernel/debug/ice"
if [ -d ${ICE_DEBUGDIR} ]
then
	mkdir -p /${dir}${ICE_DEBUGDIR}
	echo "Copying kernel debug information from ${ICE_DEBUGDIR}..."
	_copy ${ICE_DEBUGDIR}/* /${dir}/${ICE_DEBUGDIR} 2>/dev/null
fi

# Check if irdma driver debug data dir) is present; log only if present
IRDMA_DEBUGDIR="/sys/kernel/debug/irdma"
if [ -d ${IRDMA_DEBUGDIR} ]
then
	mkdir -p /${dir}${IRDMA_DEBUGDIR}
	echo "Copying kernel debug information from ${IRDMA_DEBUGDIR}..."
	_copy ${IRDMA_DEBUGDIR}/* /${dir}/${IRDMA_DEBUGDIR} 2>/dev/null
fi

# Check if rv debug data dir) is present; log only if present
RV_DEBUGDIR="/sys/kernel/debug/rv"
if [ -d ${RV_DEBUGDIR} ]
then
	mkdir -p /${dir}${RV_DEBUGDIR}
	echo "Copying kernel debug information from ${RV_DEBUGDIR}..."
	_copy ${RV_DEBUGDIR}/* /${dir}/${RV_DEBUGDIR} 2>/dev/null
fi

# Check if side channel security issue mitigation information files are
# present; log if present
SIDE_CHANNEL_MITIGATION_INFO="/sys/devices/system/cpu/vulnerabilities"
if [ -d ${SIDE_CHANNEL_MITIGATION_INFO} ]
then
	echo "Obtaining side channel security issue mitigation information from ${SIDE_CHANNEL_MITIGATION_INFO}"
	mkdir -p /${dir}${SIDE_CHANNEL_MITIGATION_INFO}
	echo "Copying side channel security issue mitigation information from ${SIDE_CHANNEL_MITIGATION_INFO}..."
	_copy ${SIDE_CHANNEL_MITIGATION_INFO}/* /${dir}${SIDE_CHANNEL_MITIGATION_INFO} 2>/dev/null
fi

# Check if side channel security issue mitigation kernel configuration files are
# present; log if present
KERNEL_CONFIG_LOC=/sys/kernel/debug/x86
SIDE_CHANNEL_MITIGATION_KERNEL_CONFIG_FILES="ibpb_enabled ibrs_enabled pti_enabled retp_enabled"
for fname in ${SIDE_CHANNEL_MITIGATION_KERNEL_CONFIG_FILES}
do
	if [ -e ${KERNEL_CONFIG_LOC}/${fname} ]
	then
		echo "Obtaining kernel configuration file ${KERNEL_CONFIG_LOC}/${fname}"
		if [ ! -d /${dir}${KERNEL_CONFIG_LOC} ]
		then
			mkdir -p /${dir}${KERNEL_CONFIG_LOC}
		fi
		echo "Copying kernel configuration file ${KERNEL_CONFIG_LOC}/${fname}..."
		_copy ${KERNEL_CONFIG_LOC}/${fname} /${dir}${KERNEL_CONFIG_LOC} 2>/dev/null
	fi
done

mkdir -p /$dir/sys/class
if [ -e /sys/class/infiniband ]
then
	echo "Copying configuration and statistics for irdma from /sys ..."
	_copy /sys/class/*infiniband* /$dir/sys/class 2>/dev/null
	mkdir -p /$dir/sys/class/infiniband
	for f in /sys/class/infiniband/*
	do
		if [ -h $f ]
		then
			rm -f /$dir/$f
			_copy $f/ /$dir/sys/class/infiniband/ 2>/dev/null
			if [ -h $f/device ]
			then
				iface=`basename $f`
				rm -f /$dir/$f/device
				mkdir -p /$dir/sys/class/infiniband/$iface/ 2>/dev/null
				_copy $f/device/ /$dir/sys/class/infiniband/$iface/ 2>/dev/null
			fi
		fi
	done
fi

if [ -e /sys/class/scsi_host ]
then
	_copy /sys/class/scsi_host /$dir/sys/class 2>/dev/null
fi
if [ -e /sys/class/scsi_device ]
then
	_copy /sys/class/scsi_device /$dir/sys/class 2>/dev/null
fi

if [ -e /sys/class/net/ ]
then
	echo "Copying network interface information"
	mkdir -p /$dir/sys/class/net
	_copy /sys/class/net/ /$dir/sys/class 2>/dev/null
	for f in /sys/class/net/*
	do
		if [ -h $f ]
		then
			rm -f /$dir/$f
			_copy $f/ /$dir/sys/class/net/ 2>/dev/null
			if [ -h $f/device ]
			then
				iface=`basename $f`
				rm -f /$dir/$f/device
				mkdir -p /$dir/sys/class/net/$iface/ 2>/dev/null
				_copy $f/device/ /$dir/sys/class/net/$iface/ 2>/dev/null
			fi
		fi
	done
fi

if [ -e /sys/module ]
then
	echo "Copying configuration and statistics data from /sys/module ..."
	_copy /sys/module /$dir/sys 2>/dev/null
fi

if [ -e /sys/class/pci_bus ]
then
	echo "Copying device information from /sys/class/pci_bus ..."
	mkdir -p /$dir/sys/class
	for f in /sys/class/pci_bus/*
	do
		if [ -h $f ]
		then
			rm -f /$dir/$f
			_copy $f/ /$dir/sys/class/pci_bus/ 2>/dev/null
		fi
	done
fi

if [ -e /sys/devices ]
then
	echo "Copying device information from /sys/devices ..."
	_copy /sys/devices /$dir/sys/ 2>/dev/null
fi

if [ $detail -ge 2 ]
then
	mkdir -p /$dir/fabric
	cd /$dir/fabric/
	PORTS='0:0'
	if [ "$ff_available" != y ]
	then
		echo "Warning: $BASENAME detail=$detail but FastFabric not available"
	fi

	if [ $detail -ge 2 -a "$ff_available" = y ]
	then
		echo "Gathering Fabric-Level Information ..."
	fi

	#TODO: change to iterate fabrics when we support multiple fabrics
	for hfi_port in $PORTS
	do
		hfi=$(expr $hfi_port : '\([0-9]*\):[0-9]*')
		port=$(expr $hfi_port : '[0-9]*:\([0-9]*\)')
		if [ "$hfi" = "" -o "$port" = "" ]
		then
			echo "$BASENAME: Error: Invalid port specification: $hfi_port" >&2
			continue
		fi
		## fixup name so winzip won't complain
		hfi_port_dir=${hfi}_${port}

		# make hfi_port directory
		mkdir $hfi_port_dir

		if [ "$ff_available" = y ]
		then
			/usr/sbin/ethfabricinfo > $hfi_port_dir/ethfabricinfo 2>&1
			/usr/sbin/ethreport -o snapshot > $hfi_port_dir/snapshot.xml 2> $hfi_port_dir/snapshot.xml.err
			/usr/sbin/ethreport -o links -X $hfi_port_dir/snapshot.xml > $hfi_port_dir/fabric_links 2>&1
			/usr/sbin/ethreport -o comps -X $hfi_port_dir/snapshot.xml > $hfi_port_dir/fabric_comps 2>&1
			/usr/sbin/ethreport -o errors -X $hfi_port_dir/snapshot.xml > $hfi_port_dir/fabric_errors 2>&1
			/usr/sbin/ethreport -o extlinks -X $hfi_port_dir/snapshot.xml > $hfi_port_dir/fabric_extlinks 2>&1
			/usr/sbin/ethreport -o slowlinks -X $hfi_port_dir/snapshot.xml > $hfi_port_dir/fabric_slowlinks 2>&1

 #           if [ $detail -gt 2 ]
 #           then
 #               echo "Gathering Multicast Membership ..."
 #               /usr/sbin/opashowmc -p $hfi:$port > $hfi_port_dir/fabric_showmc 2>&1
 #               # TODO: -o cablehealth not implement yet.
 #               # create cable health report directory and generate report
 #               if [ $ff_available = "y" ] && [ -e "${FF_CABLE_HEALTH_REPORT_DIR}" ]
 #               then
 #                   echo "Gathering Cable Health Report ..."
 #                   FF_CABLE_HEALTH_REPORT_DIR_WITH_HFI_PORT="${FF_CABLE_HEALTH_REPORT_DIR}/${hfi_port_dir}/"
 #                   mkdir -p ${FF_CABLE_HEALTH_REPORT_DIR_WITH_HFI_PORT}
 #                   /usr/sbin/ethreport -h $hfi -p $port -o cablehealth 2>/dev/null>${FF_CABLE_HEALTH_REPORT_DIR_WITH_HFI_PORT}/cablehealth$(date "+%Y%m%d%H%M%S").csv
 #               fi
 #           fi
		fi
	done
fi

if [ $ff_available = "y" ] && [ -e "${FF_CABLE_HEALTH_REPORT_DIR}" ]
then
		echo "Copying all Cable Health Reports"
		_copy ${FF_CABLE_HEALTH_REPORT_DIR} /$dir/ 2>/dev/null
fi

cd /
files="$dir"
for f in var/log/iefs* var/log/messages* var/log/ksyms.* var/log/boot* etc/*release* etc/sysconfig/ipoib.cfg* etc/eth-tools etc/modules.conf* etc/modprobe.conf* etc/sysconfig/network-scripts/ifcfg* etc/dapl/ibhosts etc/hosts etc/sysconfig/boot etc/sysconfig/firstboot etc/dat.conf etc/sysconfig/network/ifcfg* etc/infiniband etc/sysconfig/*config etc/security etc/sysconfig/iview_fm.config var/log/fm* var/log/sm* var/log/bm* var/log/pm* var/log/fe* var/log/opensm* var/log/ipath* etc/rc.d/rc.local etc/modprobe.d boot/grub/menu.lst boot/grub/grub.conf boot/grub2/grub.cfg boot/grub2/grubenv boot/grub2/device.map etc/grub*.conf etc/udev* etc/opensm etc/sysconfig/opensm etc/rdma/* etc/modprobe.d/* etc/dracut.conf.d/* etc/nsswitch.conf etc/sysconfig/irqbalance etc/snmp etc/sysconfig/snmpd
do
	if [ -e "$f" ]
	then
		files="$files $f"
	fi
done

for f in usr/local/src/mpi_apps/core* usr/src/eth/mpi_apps/core* usr/src/eth/shmem_apps/core*
do
	if [ -e "$f" ]
	then
		files="$files $f"
	fi
done
if [ "$ff_available" = y -a -d "$FF_MPI_APPS_DIR" ]
then
	apps_dir=$(echo $FF_MPI_APPS_DIR|sed -e 's|^/||')	# drop leading /
	for f in $apps_dir/core*
	do
		if [ -e "$f" ]
		then
			files="$files $f"
		fi
	done
fi

if [ $detail -ge 3 -a "$ff_available" = y ]
then
	if [ ! -d $FF_ANALYSIS_DIR/latest ]
	then
		rm -f $FF_ANALYSIS_DIR/ethallanalysis
		mkdir -p $FF_ANALYSIS_DIR
		baseline_opt=""
		if [ ! -d $FF_ANALYSIS_DIR/baseline ]
		then
			echo "Performing Fabric Analysis Baseline ..."
			baseline_opt="-b"
		else
			echo "Performing Fabric Analysis ..."
		fi
		/usr/sbin/ethallanalysis $baseline_opt > $FF_ANALYSIS_DIR/ethallanalysis 2>&1
	else
		echo "Copying Fabric Analysis ..."
	fi
	files="$files $(echo $FF_ANALYSIS_DIR|sed -e 's|^/||')"
fi

echo "Creating tar file $tar_file ..."
tar --format=gnu -czf $tar_file $files
retval=$?
rm -rf /$dir

if [ $retval -ne 0 ]
then
	echo "tar encountered an issue while generating the tarball. Please verify the tarball was created successfully, files that have changed are acceptable." >&2
fi

echo "Done."
echo
echo "Please include $tar_file with any problem reports to Customer Support"

exit $retval
